General Description: Connect EZ Marquee to Allen Bradley PLC

Connecting EZMarquee to MicroLogix PLC

To Connect EZ Marquee to a MicroLogix PLC, perform the following steps in RSLogix Programming Software:

1. Setup the PLC properties for serial communication as shown below


2. Create a string (ST) type file to insert ASCII /Hex Commands. Write out the message using the EZ String Generator software, copy the ASCII string created and paste it into the string file.



3. Setup Ladder Logic and PLC tags. Use the AWT ASCII Write function to initiate the ASCII command to trigger relevant messages. The example below illustrates this.



Connecting to EZ Marquee to SLC 5/03, 5/04 or 5/05

To Connect EZ Marquee to SLC 5/03, 5/04 or 5/05 PLC, perform the following steps in the Rockwell programming software:

1. Setup the PLC properties for serial communication as shown below


2. Create a string (ST) type file to insert ASCII/Hex commands. Write out the message using the EZ String Generator software, copy the ASCII string created and paste it into the string file.




3. Setup the Ladder Logic and control tags. Use the AWT ASCII Write function to initiate ASCII command to trigger relevant messages. The example below illustrates this


Connectivity




All Product names, trademarks and registered trademarks are the property of their respective manufacturers or legal holders. EZAutomation disclaims any proprietary interest in the marks or names of others. All prices are US List prices and are subject to change without notice. All competitors' prices and features are from their online stores or publications as of May 1st, 2007, or from tests conducted by EZAutomation.

About Us | Online Store | Downloads | Whats New | Order Catalog | Support