EZ-SP (Set Point) Overview
The EZ-SP (Set Point) panel is a low cost but high performance driven interface for data display and operator control. The EZ-SP comes with super bright, seven segment numeric LEDs for viewing data and adjusting setpoints. The 1x16 LCD screen display can be used to display a message associated with the numerical display, and there are five control pushbuttons that can be used for message viewing and data input. Using EZSeries Text Enhanced software, you can configure up to 256 data fields to be displayed via the LCD or LED display.

The Super bright 8 digit numeric display is readable from a distance of 50 feet. This feature gives the EZSeries Text panel family, option to display any PLC numeric variable that can be viewed from a considerable distance.

Front Panel Descriptions:
LCD Display
The EZ-SP has one message line which can display up to 16 characters. Messages will be displayed based on the data displayed in the 8-position LED numerical display. You don’t need to create a label to describe the data. All you have to do is use the software to program the message of the label to be
displayed with the data. When configured, this display will show values from PLC registers.

Control Pushbuttons
There are five control pushbuttons on the front of the panel. When configured using the EZSeries Text Enhanced programming software, a message can be set using the arrow pushbuttons. The operator can press the arrow buttons to increment or decrement the numeric value. The value will be updated in the PLC only after the enter button has been pressed. The “esc” button will abort or cancel the adjustment without setting the PLC.

Numeric Display
The EZ-SP has an eight-position numeric display with seven segment, super bright intensity LEDs which makes them easy to view. When configured, this display will show values from PLC registers.